PCB is sold as a replacement and will not come with UDB/BTDB (one per keyboard).

Quality Disclaimer:

• No scratches on exposed / user facing parts of the keyboard (after installation of plate & PCB).
• Possible machining marks / micro scratches on the inside of the kit / pieces not exposed to the user. This includes scratches arising from anodisation hooks.
• Screw holes are NOT anodised.
• Possible marks close to screw area.
• Raw top and bottom pieces may have scratches present and are susceptible to scratches. Raw parts may also tarnish over time if left uncoated.
• Anodisation and e-coating variation may be present between top and bottom pieces.
• Copper patina: Copper as a material tarnishes over time, you can clean it but note that it's a form of oxidation that we cannot control.
• Marks / streaks that are not visible after assembly.
• Please note that your purchase denotes agreement to the pre-order rules which include all the above.

Specifications

Kei V2 Top

• Kei v2 top case for 60% layouts. Magnets are pre-installed.
• Layout: WK / HHKB
• Material: Aluminium, Polycarbonate, Copper
• Aluminium colours: Silver, Noren Blue, Blush Pink, Jungle Purple, E-white, Raw
• Copper: Sandblasted with anti-oxidant coating
• Note: Feet & Kaban sold separately.

Kei V2 Bottom

• Kei v2 bottom case for 60% layout. Magnets are pre-installed.
• Material: Aluminium, Polycarbonate
• Aluminium colours: Silver, Noren Blue, Blush Pink, Jungle Purple, E-white, Raw
• Note: Kaban sold separately.

MX PCB Specs

• Only compatible with MX switches.
• Supports PCB mount stabilisers
• Designed for MONOKEI by Kopibeng
• Spacebar Orientation: North
• 1.6 mm FR4 PCB
• RGB underglow
• PCB comes flashed with the requisite firmware.
• Please use VIA to modify it.
• Bluetooth daughterboard, JST cable and battery sold separately.

Kei V2 Silicone Pack

• The silicone pack comes with
• 4 x feet
• 8 x gasket socks
• 1 x USB cover
• 1 x battery sleeve
• 1 x 60% plate dampener
• 1 x 60% Seion sheet (in PORON® Black)
• *Note: Plate dampener is not supported with EC build

Kohaku Backplate

Material and Colour: Aluminium Silver
Finishing: Anodised with Enamel Infill
Includes 4 backplate screws
Designed by SINGAKBD
Quality Expectations

• While we strive to provide a perfect experience, no kits can be 100% flawless at our scale of production, as such the caveats are as follows:
• No scratches on exposed / user facing parts of the keyboard
• Possible machining marks / micro scratches on the inside of the pieces not exposed to the user. This includes scratches arising from anodisation hooks.
• Possible marks close to screw area
• Please note that your purchase denotes agreement to the pre-order rules which include all the above.

Kei V2 Bluetooth DB Pack

Your bluetooth daughterboard pack comes with:
- Bluetooth daughterboard
- daughterboard cable
- daughterboard screws
- Lithium-ion polymer battery

Additional Information
- Bluetooth daughterboard and battery is FCC and CE certified
- Battery nominal voltage is 3.7 V and its capacity is 760 mAh
- Tested with Kei v2. Compatible with QMK/VIA.

Kei V2 EC PCB and Plate Bundle

Comes with requisite screws & 2x stabiliser pads

Only compatible with electrocapacitive parts.
Tested with Deskeys and OEM parts.
- Designed for MONOKEI by Cipulot
- Spacebar Orientation: North
- 1.6 mm FR4 PCB
- Aluminium (silver) plate
- 2u mods are EC compatible (not included in the bundle)
- Spacebar requires MX plate mount 7u stabiliser (not included in the bundle)
- Comes with requisite screws & 2x stabiliser pads
- Comes with 1x spacebar 1u housing
- PCB comes flashed with the requisite firmware.
Please use VIA to modify it."
- Bluetooth daughterboard, JST cable and battery sold separately.